сборка медиацентра

[olhov]

Чтото я вообще ничего не понимаю, установил 10.10...
dmesg | grep dvb
[ 9.758998] cx23885_dvb_register() allocating 1 frontend(s)
[ 9.759002] cx23885[0]: cx23885 based dvb ca

Фирмварь не просит(

cat /proc/bus/input/devices

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
U: Uniq=
H: Handlers=kbd event0
B: EV=3
B: KEY=100000 0 0 0

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
U: Uniq=
H: Handlers=kbd event1
B: EV=3
B: KEY=100000 0 0 0

I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input2
U: Uniq=
H: Handlers=sysrq kbd event2
B: EV=120013
B: KEY=4 2000000 3803078 f800d001 feffffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=7

I: Bus=0003 Vendor=09da Product=000a Version=0110
N: Name="A4Tech PS/2+USB Mouse"
P: Phys=usb-0000:00:1a.0-1.3/input0
S: Sysfs=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input3
U: Uniq=
H: Handlers=mouse0 event3
B: EV=17
B: KEY=ff0000 0 0 0 0 0 0 0 0
B: REL=343
B: MSC=10

dmesg | grep cx

[ 9.631151] cx23885 driver version 0.0.2 loaded
[ 9.631185] cx23885 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 9.631459] CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470 [card=15,autodetected]
[ 9.758998] cx23885_dvb_register() allocating 1 frontend(s)
[ 9.759002] cx23885[0]: cx23885 based dvb card
[ 9.761648] DVB: registering new adapter (cx23885[0])
[ 9.789752] cx23885_dev_checkrevision() Hardware revision = 0xb0
[ 9.789761] cx23885[0]/0: found at 0000:03:00.0, rev: 2, irq: 17, latency: 0, mmio: 0xfb200000
[ 9.789770] cx23885 0000:03:00.0: setting latency timer to 64

Устанавливал и liplianina и вот это http://linuxtv.org/hg/~awalls/cx23885-ir2
никаких изменений

Ума не приложу что делать? Цель получить устройство ввода в /proc/bus/input/devices для дальнейшей настройки пульта.